teamviewer connection (wodVPN)

by amine1973, Thursday, November 07, 2013, 09:35 (4152 days ago)

Hi,

if i want to use teamviewer between 2 peers without full network redirection, how can i do this, knowing that i can not use the ip (as you always say) 127.0.0.1 because teamviewer connect to itself on the client, and i can not connect using custom ports that i forwarded.

so i can not use the method of listen ip=127.0.0.1 and redirect to ip=127.0.0.1
cause when i use teamviewer and enter 127.0.0.1 it try to connect to local machine and not the host.

how can i do it?

Thanks,

teamviewer connection

by Jasmine, Thursday, November 07, 2013, 10:16 (4152 days ago) @ amine1973

Amine,

hi. If I check on 'extras' menu of teamviewer, I see that by default 'accept LAN connections' is not enabled. So, TeamViewer does not listen on port 5938 by default.

On remote peer side, enable it so it listens on 5938. Then you create port forwarding on local 127.0.0.1 (which is free) to remote side's 5938.

Can you try that?

Kreso

teamviewer connection

by amine1973, Thursday, November 07, 2013, 10:46 (4152 days ago) @ Jasmine

Thank you for your reply,

1-i disabled incoming lan on client, i enabled it on remote.
2-i did a wodvpn connection between client and host
3-on client side i did tcp 127.0.0.1 port 5938 forward to 127.0.0.1 port 5938.
4- i tried to connect teamviewer , it didn't works
what we missed?

thanks again.

teamviewer connection

by Jasmine, Thursday, November 07, 2013, 11:17 (4151 days ago) @ amine1973

Hi.

I just tried, and it worked without any problems.

Are you sure you enabled remote to accept new clients? Is remote's port 5938 open and accepting connections?

Did you add forwarding channel correctly?

Kreso

thank you it works

by amine1973, Thursday, November 07, 2013, 11:18 (4151 days ago) @ amine1973

Hello,

thank you it works now, teamviewer didn't works but ver8 did.

i hope this note will be helpfull for other.

but i have a mixed question between your ftp server component and wodvpn,

when i forwarded port 21 to client, and when i try to ftp connect the host it shows connection refused.

is this an issue in wodvpn or ftpd?

I appreciate your help.

Regards,

thank you it works

by Jasmine, Thursday, November 07, 2013, 11:20 (4151 days ago) @ amine1973

You want to forward FTP connection? Besides using port 21 for control connection, FTP protocol also use other port (20, or any other, depends on ftp client/server) for data connection. So, you may be able to connect (through 21), but you will not be able to list directory or transfer files.

You would need sort of FTP proxy that would redirect data connections.

Kreso

it is your ftp server component

by amine1973, Thursday, November 07, 2013, 11:32 (4151 days ago) @ Jasmine

Hi again,

I use your ftp server component, and the client is IE, or filezilla.

and you are right i can connect, but i can not list the folder.

can i do anything, knowing than when i do full redirect your ftp server component did works, so i guess this component use another port.

Thanks

it is your ftp server component

by Jasmine, Thursday, November 07, 2013, 11:37 (4151 days ago) @ amine1973

Hi.

Not easily. You can intercept control connection and check PORT commands and PASV responses, then change them to use your own proxy, and "on the fly" open new forwarding channel in wodVPN. As I said - not easy.

I would suggest you use different protocol, such as SFTP, since wodFTPServer supports that as well, and it uses only one port.

Kreso

Product groups

Support

teamviewer connection (wodVPN)

teamviewer connection

teamviewer connection

teamviewer connection

thank you it works

thank you it works

it is your ftp server component

it is your ftp server component

About

Contact